Enum IpAddr

pub enum IpAddr {
    V4(Ipv4Addr),
    V6(Ipv6Addr),
}

An IP address, either IPv4 or IPv6.

This enum can contain either an Ipv4Addr or an Ipv6Addr, see their respective documentation for more details.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

let localhost_v4 = IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1));
let localhost_v6 = IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

assert_eq!("127.0.0.1".parse(), Ok(localhost_v4));
assert_eq!("::1".parse(), Ok(localhost_v6));

assert_eq!(localhost_v4.is_ipv6(), false);
assert_eq!(localhost_v4.is_ipv4(), true);

Variants

V4(Ipv4Addr)

An IPv4 address.

V6(Ipv6Addr)

An IPv6 address.

Implementations

impl IpAddr

pub const fn is_unspecified(&self) -> bool

Returns true for the special ‘unspecified’ address.

See the documentation for Ipv4Addr::is_unspecified() and Ipv6Addr::is_unspecified() for more details.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(0, 0, 0, 0)).is_unspecified(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0)).is_unspecified(), true);

pub const fn is_loopback(&self) -> bool

Returns true if this is a loopback address.

See the documentation for Ipv4Addr::is_loopback() and Ipv6Addr::is_loopback() for more details.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)).is_loopback(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1)).is_loopback(), true);

pub const fn is_global(&self) -> bool

🔬This is a nightly-only experimental API. (ip)

Returns true if the address appears to be globally routable.

See the documentation for Ipv4Addr::is_global() and Ipv6Addr::is_global() for more details.

Examples

#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(80, 9, 12, 3)).is_global(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0x1c9, 0, 0, 0xafc8, 0, 0x1)).is_global(), true);

pub const fn is_multicast(&self) -> bool

Returns true if this is a multicast address.

See the documentation for Ipv4Addr::is_multicast() and Ipv6Addr::is_multicast() for more details.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(224, 254, 0, 0)).is_multicast(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0)).is_multicast(), true);

pub const fn is_documentation(&self) -> bool

🔬This is a nightly-only experimental API. (ip)

Returns true if this address is in a range designated for documentation.

See the documentation for Ipv4Addr::is_documentation() and Ipv6Addr::is_documentation() for more details.

Examples

#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_documentation(), true);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_documentation(),
    true
);

pub const fn is_benchmarking(&self) -> bool

🔬This is a nightly-only experimental API. (ip)

Returns true if this address is in a range designated for benchmarking.

See the documentation for Ipv4Addr::is_benchmarking() and Ipv6Addr::is_benchmarking() for more details.

Examples

#![feature(ip)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(198, 19, 255, 255)).is_benchmarking(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0x2, 0, 0, 0, 0, 0, 0)).is_benchmarking(), true);

pub const fn is_ipv4(&self) -> bool

Returns true if this address is an IPv4 address, and false otherwise.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_ipv4(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_ipv4(), false);

pub const fn is_ipv6(&self) -> bool

Returns true if this address is an IPv6 address, and false otherwise.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

assert_eq!(IpAddr::V4(Ipv4Addr::new(203, 0, 113, 6)).is_ipv6(), false);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0)).is_ipv6(), true);

pub const fn to_canonical(&self) -> IpAddr

Converts this address to an IpAddr::V4 if it is an IPv4-mapped IPv6 address, otherwise returns self as-is.

Examples

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

let localhost_v4 = Ipv4Addr::new(127, 0, 0, 1);

assert_eq!(IpAddr::V4(localhost_v4).to_canonical(), localhost_v4);
assert_eq!(IpAddr::V6(localhost_v4.to_ipv6_mapped()).to_canonical(), localhost_v4);
assert_eq!(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)).to_canonical().is_loopback(), true);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0x7f00, 0x1)).is_loopback(), false);
assert_eq!(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0x7f00, 0x1)).to_canonical().is_loopback(), true);

pub const fn as_octets(&self) -> &[u8]

🔬This is a nightly-only experimental API. (ip_as_octets)

Returns the eight-bit integers this address consists of as a slice.

Examples

#![feature(ip_as_octets)]

use std::net::{Ipv4Addr, Ipv6Addr, IpAddr};

assert_eq!(IpAddr::V4(Ipv4Addr::LOCALHOST).as_octets(), &[127, 0, 0, 1]);
assert_eq!(IpAddr::V6(Ipv6Addr::LOCALHOST).as_octets(),
           &[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1])

impl IpAddr

pub fn parse_ascii(b: &[u8]) -> Result<IpAddr, AddrParseError>

🔬This is a nightly-only experimental API. (addr_parse_ascii)

Parse an IP address from a slice of bytes.

#![feature(addr_parse_ascii)]

use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};

let localhost_v4 = IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1));
let localhost_v6 = IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

assert_eq!(IpAddr::parse_ascii(b"127.0.0.1"), Ok(localhost_v4));
assert_eq!(IpAddr::parse_ascii(b"::1"), Ok(localhost_v6));

Trait Implementations

impl<'a> AddAnyAttr for IpAddr

type Output<SomeNewAttr: Attribute> = IpAddr

The new type once the attribute has been added.

fn add_any_attr<NewAttr>( self, _attr: NewAttr, ) -> <IpAddr as AddAnyAttr>::Output<NewAttr>

where NewAttr: Attribute,

Adds an attribute to the view.

impl Archive for IpAddr

type Archived = ArchivedIpAddr

The archived representation of this type.

type Resolver = ()

The resolver for this type. It must contain all the additional information from serializing needed to make the archived type from the normal type.

unsafe fn resolve( &self, pos: usize, resolver: <IpAddr as Archive>::Resolver, out: *mut <IpAddr as Archive>::Archived, )

Creates the archived version of this value at the given position and writes it to the given output.

impl AttributeValue for IpAddr

type AsyncOutput = IpAddr

The type once all async data have loaded.

type State = (Element, IpAddr)

The state that should be retained between building and rebuilding.

type Cloneable = IpAddr

A version of the value that can be cloned. This can be the same type, or a reference-counted type. Generally speaking, this does not need to refer to the same data, but should behave in the same way. So for example, making an event handler cloneable should probably make it reference-counted (so that a FnMut() continues mutating the same closure), but making a String cloneable does not necessarily need to make it an Arc<str>, as two different clones of a String will still have the same value.

type CloneableOwned = IpAddr

A cloneable type that is also 'static. This is used for spreading across types when the spreadable attribute needs to be owned. In some cases (&'a str to Arc<str>, etc.) the owned cloneable type has worse performance than the cloneable type, so they are separate.

fn html_len(&self) -> usize

An approximation of the actual length of this attribute in HTML.

fn to_html(self, key: &str, buf: &mut String)

Renders the attribute value to HTML.

fn to_template(_key: &str, _buf: &mut String)

Renders the attribute value to HTML for a <template>.

fn hydrate<const FROM_SERVER: bool>( self, key: &str, el: &Element, ) -> <IpAddr as AttributeValue>::State

Adds interactivity as necessary, given DOM nodes that were created from HTML that has either been rendered on the server, or cloned for a <template>.

fn build(self, el: &Element, key: &str) -> <IpAddr as AttributeValue>::State

Adds this attribute to the element during client-side rendering.

fn rebuild(self, key: &str, state: &mut <IpAddr as AttributeValue>::State)

Applies a new value for the attribute.

fn into_cloneable(self) -> <IpAddr as AttributeValue>::Cloneable

Converts this attribute into an equivalent that can be cloned.

fn into_cloneable_owned(self) -> <IpAddr as AttributeValue>::CloneableOwned

Converts this attributes into an equivalent that can be cloned and is 'static.

fn dry_resolve(&mut self)

“Runs” the attribute without other side effects. For primitive types, this is a no-op. For reactive types, this can be used to gather data about reactivity or about asynchronous data that needs to be loaded.

async fn resolve(self) -> <IpAddr as AttributeValue>::AsyncOutput

“Resolves” this into a form that is not waiting for any asynchronous data.

impl<'de, __Context> BorrowDecode<'de, __Context> for IpAddr

fn borrow_decode<D>(decoder: &mut D) -> Result<IpAddr, DecodeError>

where D: BorrowDecoder<'de, Context = __Context>,

Attempt to decode this type with the given BorrowDecode.

impl Clone for IpAddr

fn clone(&self) -> IpAddr

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for IpAddr

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<Context> Decode<Context> for IpAddr

fn decode<D>(decoder: &mut D) -> Result<IpAddr, DecodeError>

where D: Decoder<Context = Context>,

Attempt to decode this type with the given Decode.

impl<'de> Deserialize<'de> for IpAddr

fn deserialize<D>( deserializer: D, ) -> Result<IpAddr, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for IpAddr

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Encode for IpAddr

fn encode<E>(&self, encoder: &mut E) -> Result<(), EncodeError>

where E: Encoder,

Encode a given type.

impl From<[u16; 8]> for IpAddr

fn from(segments: [u16; 8]) -> IpAddr

Creates an IpAddr::V6 from an eight element 16-bit array.

Examples

use std::net::{IpAddr, Ipv6Addr};

let addr = IpAddr::from([
    0x20du16, 0x20cu16, 0x20bu16, 0x20au16,
    0x209u16, 0x208u16, 0x207u16, 0x206u16,
]);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(
        0x20d, 0x20c, 0x20b, 0x20a,
        0x209, 0x208, 0x207, 0x206,
    )),
    addr
);

impl From<[u8; 16]> for IpAddr

fn from(octets: [u8; 16]) -> IpAddr

Creates an IpAddr::V6 from a sixteen element byte array.

Examples

use std::net::{IpAddr, Ipv6Addr};

let addr = IpAddr::from([
    0x19u8, 0x18u8, 0x17u8, 0x16u8, 0x15u8, 0x14u8, 0x13u8, 0x12u8,
    0x11u8, 0x10u8, 0x0fu8, 0x0eu8, 0x0du8, 0x0cu8, 0x0bu8, 0x0au8,
]);
assert_eq!(
    IpAddr::V6(Ipv6Addr::new(
        0x1918, 0x1716, 0x1514, 0x1312,
        0x1110, 0x0f0e, 0x0d0c, 0x0b0a,
    )),
    addr
);

impl From<[u8; 4]> for IpAddr

fn from(octets: [u8; 4]) -> IpAddr

Creates an IpAddr::V4 from a four element byte array.

Examples

use std::net::{IpAddr, Ipv4Addr};

let addr = IpAddr::from([13u8, 12u8, 11u8, 10u8]);
assert_eq!(IpAddr::V4(Ipv4Addr::new(13, 12, 11, 10)), addr);

impl From<IpAddr> for IpAddr

fn from(addr: IpAddr) -> IpAddr

Converts to this type from the input type.

impl From<IpAddr> for IpAddr

fn from(value: IpAddr) -> IpAddr

Converts to this type from the input type.

impl From<IpAddr> for IpNet

fn from(addr: IpAddr) -> IpNet

Converts to this type from the input type.

impl From<IpAddr> for ServerName<'_>

fn from(addr: IpAddr) -> ServerName<'_>

Converts to this type from the input type.

impl From<Ipv4Addr> for IpAddr

fn from(ipv4: Ipv4Addr) -> IpAddr

Copies this address to a new IpAddr::V4.

Examples

use std::net::{IpAddr, Ipv4Addr};

let addr = Ipv4Addr::new(127, 0, 0, 1);

assert_eq!(
    IpAddr::V4(addr),
    IpAddr::from(addr)
)

impl From<Ipv6Addr> for IpAddr

fn from(ipv6: Ipv6Addr) -> IpAddr

Copies this address to a new IpAddr::V6.

Examples

use std::net::{IpAddr, Ipv6Addr};

let addr = Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff);

assert_eq!(
    IpAddr::V6(addr),
    IpAddr::from(addr)
);

impl FromStr for IpAddr

type Err = AddrParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<IpAddr, AddrParseError>

Parses a string s to return a value of this type.

impl Hash for IpAddr

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIpv6Addr for IpAddr

fn into_ipv6_addr(self) -> Ipv6Addr

Consumes the object and returns an Ipv6Addr.

impl Ord for IpAddr

fn cmp(&self, other: &IpAddr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq<ArchivedIpAddr> for IpAddr

fn eq(&self, other: &ArchivedIpAddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<IpAddr> for ArchivedIpAddr

fn eq(&self, other: &IpAddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<IpAddr> for Ipv4Addr

fn eq(&self, other: &IpAddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<IpAddr> for Ipv6Addr

fn eq(&self, other: &IpAddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Ipv4Addr> for IpAddr

fn eq(&self, other: &Ipv4Addr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Ipv6Addr> for IpAddr

fn eq(&self, other: &Ipv6Addr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for IpAddr

fn eq(&self, other: &IpAddr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<ArchivedIpAddr> for IpAddr

fn partial_cmp(&self, other: &ArchivedIpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IpAddr> for ArchivedIpAddr

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IpAddr> for Ipv4Addr

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IpAddr> for Ipv6Addr

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv4Addr> for IpAddr

fn partial_cmp(&self, other: &Ipv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv6Addr> for IpAddr

fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for IpAddr

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PatchField for IpAddr

fn patch_field( &mut self, new: IpAddr, path: &StorePath, notify: &mut dyn FnMut(&StorePath), )

Patches the field with some new value, only notifying if the value has changed.

impl Render for IpAddr

type State = IpAddrState

The “view state” for this type, which can be retained between updates.

fn build(self) -> <IpAddr as Render>::State

Creates the view for the first time, without hydrating from existing HTML.

fn rebuild(self, state: &mut <IpAddr as Render>::State)

Updates the view with new data.

impl RenderHtml for IpAddr

const MIN_LENGTH: usize = 0usize

The minimum length of HTML created when this view is rendered.

type AsyncOutput = IpAddr

The type of the view after waiting for all asynchronous data to load.

type Owned = IpAddr

An equivalent value that is 'static.

fn dry_resolve(&mut self)

“Runs” the view without other side effects. For primitive types, this is a no-op. For reactive types, this can be used to gather data about reactivity or about asynchronous data that needs to be loaded.

async fn resolve(self) -> <IpAddr as RenderHtml>::AsyncOutput

Waits for any asynchronous sections of the view to load and returns the output.

fn to_html_with_buf( self, buf: &mut String, position: &mut Position, _escape: bool, _mark_branches: bool, _extra_attrs: Vec<AnyAttribute>, )

Renders a view to HTML, writing it into the given buffer.

fn hydrate<const FROM_SERVER: bool>( self, cursor: &Cursor, position: &PositionState, ) -> <IpAddr as Render>::State

Makes a set of DOM nodes rendered from HTML interactive.

fn into_owned(self) -> <IpAddr as RenderHtml>::Owned

Convert into the equivalent value that is 'static.

const EXISTS: bool = true

Whether this should actually exist in the DOM, if it is the child of an element.

fn html_len(&self) -> usize

An estimated length for this view, when rendered to HTML.

fn to_html(self) -> String

where Self: Sized,

Renders a view to an HTML string.

fn to_html_branching(self) -> String

where Self: Sized,

Renders a view to HTML with branch markers. This can be used to support libraries that diff HTML pages against one another, by marking sections of the view that branch to different types with marker comments.

fn to_html_stream_in_order(self) -> StreamBuilder

where Self: Sized,

Renders a view to an in-order stream of HTML.

fn to_html_stream_in_order_branching(self) -> StreamBuilder

where Self: Sized,

Renders a view to an in-order stream of HTML with branch markers. This can be used to support libraries that diff HTML pages against one another, by marking sections of the view that branch to different types with marker comments.

fn to_html_stream_out_of_order(self) -> StreamBuilder

where Self: Sized,

Renders a view to an out-of-order stream of HTML.

fn to_html_stream_out_of_order_branching(self) -> StreamBuilder

where Self: Sized,

Renders a view to an out-of-order stream of HTML with branch markers. This can be used to support libraries that diff HTML pages against one another, by marking sections of the view that branch to different types with marker comments.

fn to_html_async_with_buf<const OUT_OF_ORDER: bool>( self, buf: &mut StreamBuilder, position: &mut Position, escape: bool, mark_branches: bool, extra_attrs: Vec<AnyAttribute>, )

where Self: Sized,

Renders a view into a buffer of (synchronous or asynchronous) HTML chunks.

fn hydrate_async( self, cursor: &Cursor, position: &PositionState, ) -> impl Future<Output = Self::State>

Asynchronously makes a set of DOM nodes rendered from HTML interactive.

fn hydrate_from<const FROM_SERVER: bool>(self, el: &Element) -> Self::State

where Self: Sized,

Hydrates using RenderHtml::hydrate, beginning at the given element.

fn hydrate_from_position<const FROM_SERVER: bool>( self, el: &Element, position: Position, ) -> Self::State

where Self: Sized,

Hydrates using RenderHtml::hydrate, beginning at the given element and position.

impl<S> Serialize<S> for IpAddr

where S: Fallible + ?Sized,

fn serialize( &self, serializer: &mut S, ) -> Result<<IpAddr as Archive>::Resolver, <S as Fallible>::Error>

Writes the dependencies for the object and returns a resolver that can create the archived type.

impl Serialize for IpAddr

fn serialize<S>( &self, serializer: S, ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl<'a> ToTemplate for IpAddr

const TEMPLATE: &'static str = " <!>"

The HTML content of the static template.

fn to_template( buf: &mut String, _class: &mut String, _style: &mut String, _inner_html: &mut String, position: &mut Position, )

Renders a view type to a template. This does not take actual view data, but can be used for constructing part of an HTML <template> that corresponds to a view of a particular type.

const CLASS: &'static str = ""

The class attribute content known at compile time.

const STYLE: &'static str = ""

The style attribute content known at compile time.

const LEN: usize = _

The length of the template.

fn to_template_attribute( buf: &mut String, class: &mut String, style: &mut String, inner_html: &mut String, position: &mut Position, )

Renders a view type to a template in attribute position.

impl Copy for IpAddr

impl Eq for IpAddr

impl StructuralPartialEq for IpAddr